Laser Cutting System for 3D Composite Materials

Product introduction
LaserRobo Metal Defamation 3-D Laser Cutting Robot is a C02 laser application scheme for 3-D non-metallic material cutting.
Precision six-axis robot is perfectly matched with CO2 light path. It is built into the robot hollow arm through the light path, which greatly reduces the movement trunk.
Involve. According to different technological requirements, the C2 cutting heads with different focal lengths can be selected, and the anti-collision module can be configured to enable the motion collision to occur.
Timely output collision warning signal, effectively protect laser head and robot.
Product characteristics
High-precision six-axis robot is selected, and the flight light path is corrected by professional optical instruments, so the processing accuracy is high.
Laser cutting technology has wide window, high quality cutting section, no burr, no slag hanging;
Co2 laser is highly integrated with robots, especially suitable for laser processing of complex three-dimensional surfaces.
The whole machine is compact in structure and easy to install and debug.
Based on the EtherCAT bus protocol master station, it integrates touch screen and PLC, and has a serial interface. It has strong versatility and applicability.
technical parameter
Co2 laser
Output power: 250W/120W/60W
Wavelength: 10.6um
Beam quality (M2): W1.2
Cutting head
Focus range: 10mm (-3 +7)
Auxiliary gas pressure: wIObar
Focal length: 75 mm; 125 mm; 150 mm; 200 mm.
Robot
Model: FANUC M-20iA
Scope of work: working radius 1811 mm
Repeated positioning accuracy: +0.08mm
Installation mode: ground installation, ceiling installation, inclination angle installation